We’re making some changes to the Simplex Net starting tonight. To give all net participants more information about propagation and reception we’re making the following changes to our operating procedures:
Two simple changes
- During your check-in, please tell us your transmit strength in watts. So your full report should sound similar to: “This is K3MJN. My name is Mike and I’m transmitting from Lititz with 25 watts. My answer to the question of the week is ________.”
- Net control will give you a signal strength report when they acknowledge your check-in. The report will be in the Readability-Strength (5-9) format.
What do we hope to gain by making these changes?
We expect to train better operators and have them build better stations!
From anecdotal evidence, it seems that most hams operate on the Simplex Net with their radio set to maximum power, whatever that might be. Good amateur operating procedure dictates that we all use the minimum power needed to get our transmission to the intended recipient. Just because you have a radio capable of 50 watts doesn’t mean you need to transmit at that power all the time.
If you’re new to the hobby, just changed your equipment, or are operating from a new location that might be justified. In any of those cases, you don’t have enough practical experience to know how your station is performing. By sharing transmit strength and signal reports, we’ll all start to gain knowledge and experience together. After you’ve got a few weeks of signal reports back when your operating at “full power Scotty” you’ll be ready to start backing the power down and compare the results.
After a month or two of varying your power each week you’ll have a good idea of how many watts it takes to get your message across the neighborhood, across town, or to the far side of the county. We’ll all learn from practical experience how VHF performance is most influenced by antenna height, line of sight, and good station design. If you’re not “getting out” the way that you desire, you might even decide to make some changes to your station to improve performance. Maybe that means raising your omni antenna another 10-15 feet. Perhaps switching to a different antenna type: dipole, beam, or yagi?
Or you might learn that your transmissions are just fine but your reception isn’t as good as you’d expect–when you find the guy down the street sounds weak even though he’s blasting out 100 watts. It could be time to reposition your antenna, check your feedline, or buy that new higher end rig you’ve been looking at for months.
More info about Readability and Strength reports
Readability and Strength are the first two components of the R-S-T system of signal reporting. Since our simplex net is FM voice we don’t worry about the third component (tone) which applies only to CW. Here’s what the values mean for readability and strength:
Readability
1–Unreadable
2–Barely readable, occasional words distinguishable.
3–Readable with considerable difficulty.
4–Readable with practically no difficulty.
5–Perfectly readable.
Signal Strength
1–Faint signals, barely perceptible.
2–Very weak signals.
3–Weak signals.
4–Fair signals.
5–Fairly good signals.
6–Good signals.
7–Moderately strong signals.
8–Strong signals.
9–Extremely strong signals.
There’s also a fairly good article on Wikipedia about the R-S-T System.
Mike, maybe you should also ask what kind of antenna…
Sent from Mail for Windows 10
LikeLike
We asked about antenna height above ground and antenna type during the question of the week early on in the life of the net… three months ago. It’s probably time to ask again to keep our database up to date. Not somehtign we’d want as part of the report every week since most folks don’t change their antenna that frequently.
LikeLike
Optional question could be elevation. I have an app that tells me that.
LikeLike
Thanks Mike for this great explanation. The signal reporting should be helpful to all of us. W3TEY.
LikeLike
Michael, this was very informative and helpful. good Job.
KA3PLA
LikeLike
Nice explanation if it’s on my radio I’ve never noticed. New glasses soon. I have mobile and HT radios sometimes times tough to read for us older folks. Had my license almost 20 yrs but learned more in the last 4 months. Thanks to you and the others for your help.
LikeLike
Here in Middle TN we put Net Control’s radio display & audio on YouTube, which everyone seems to find useful, especially if they can’t hear who Net Control is talking to. Go to https://youtu.be/VQV9gPIqerw to see very long net, as it includes a 2m USB and 6m USB net.
Keep up the good work!!!
LikeLike